MAX96706GTJ+

The MAX96706 deserializer for automotive camera applications has several features and benefits: 1. Adaptive equalization and an output crosspoint switch . 2. Embedded control channel operating at 9.6kbps to 1Mbps in UART, I2C, and mixed UART/I2C modes for programming serializer, deserializer, and camera registers independently of video timing . 3. Ability to track data from a spread-spectrum serial input meeting ISO 10605 and IEC 61000-4-2 ESD standards . 4. Core supply range of 1.7V to 1.9V and I/O supply range of 1.7V to 3.6V . 5. Available in a 32-pin (5mm x 5mm) TQFN package with 0.5mm lead pitch and operates over -40°C to +115°C temperature range . 6. Ideal for safety camera applications and works with low-cost 50Ω coax (100Ω STP) cable . 7. Error detection of video/control data . 8. Offers a variety of output widths and word rates up to a total serial-data rate of up to 1.75Gbps . 9. High-bandwidth mode with a 116MHz parallel clock rate and 12 bits of video data + 2 bits of sync data . 10. CRC protection of video and control data for safety applications . 11. Control-channel retransmission and high-immunity modes to reduce the effects of bit errors on communication . 12. Automatic equalization, PRBS tester, and embedded eye-width monitor for in-system optimization of the link . 13. Operates over the -40°C to +115°C automotive temperature range . 14. Meets AEC-Q100 automotive specification and has ±8kV contact and ±15kV air IEC 61000-4-2 and ISO 10605 ESD protection . MAX96706 14-Bit GMSL Deserializer with Coax or STP Cable Input.

The core supply range for the MAX96706 deserializer is 1.7V to 1.9V.

The embedded control channel of the MAX96706 operates in three different modes for programming serializer, deserializer, and camera registers. These modes include: 1. Forward Control Channel: Control data sent from the serializer to the deserializer is transmitted on the forward control channel. The data is encoded within the high-speed link and extracted after deserialization. The forward control-channel bandwidth exceeds the maximum external control data rate . 2. Reverse Control Channel: Control data sent from the deserializer to the serializer is transmitted on the reverse control channel. The data is encoded and sent back to the serializer for programming purposes . 3. Sleep Mode: To reduce power consumption, the devices can be put into sleep mode. In this mode, all functions are powered down except for the wake-up detectors on the local I2C/UART interface and the serial link. Any activity detected by the wake-up detectors temporarily turns on the control-channel interface, allowing a microcontroller to command the device to exit sleep mode . Therefore, the embedded control channel of the MAX96706 operates in forward control channel, reverse control channel, and sleep mode for programming serializer, deserializer, and camera registers. .