RFQ/BOM 0 Registrazione / Registrati

Seleziona la tua posizione

BCM53282MKPBG

Ethernet ICs 8FE(PHY)+2GE(GMII/RGMII)+IMP(MII/RvMII)

Le immagini servono solo come riferimento.
Consulta le specifiche del prodotto per i dettagli del prodotto.

Mezzi sociali

BCM53282MKPBG

Ethernet ICs 8FE(PHY)+2GE(GMII/RGMII)+IMP(MII/RvMII)

Gli ordini superiori a $ 200 hanno diritto a un regalo in stile cinese in edizione limitata.

Gli ordini superiori a $ 200 hanno diritto a un regalo in stile cinese in edizione limitata.

Gli ordini superiori a $ 1000 beneficiano di un'esenzione dalle spese di spedizione di $ 30.

Gli ordini superiori a $ 5000 beneficiano dell'esenzione dalle spese di spedizione e di transazione.

Queste offerte sono applicabili sia ai clienti nuovi che a quelli esistenti e sono valide dal 1 gennaio 2024 al 31 dicembre 2024.

  • Produttore:

    Broadcom

  • Scheda dati:

    BCM53282MKPBG datasheet

  • Pacchetto/custodia:

    BGA

  • categoria di prodotto:

    Chip IC

  • RoHS Status: Stato RoHS Lead free/RoHS Compliant

Invia la tua richiesta di preventivo adesso e prevediamo di fornirti un preventivo entro maggio 08, 2024. Effettua ora il tuo ordine e prevediamo di completare la transazione entro maggio 13, 2024. Ps: L'orario è secondo GMT+8:00.

Consegna:
fedex ups ems dhl other
Pagamento :
jcb American express tt discover paypal

Azione:2060 PCS

Il nostro impegno è fornire preventivi tempestivi entro 12 ore. Per ulteriore assistenza, contattaci all'indirizzo sales@censtry.com.

BCM53282MKPBG Dettagli del prodotto

FEATURES

• Tenth-generation L2+ Fast Ethernet (FE) switch with interfaces 

- 8-/16-/24-port 10/100 transceivers for TX/RX supporting auto power-down modes 

- 8/16/24 MAC and one MAC/GMAC for IMP 

- Two GMACs or four GMACs or two GMACs with one 2.5G MAC 

- 10 Mbit (1.25 MB) packet buffer and control memory 

- Management port with RvMII/MII or RGMII interface

• Nonblocking switch fabric 

• 65 nm design with lower power consumption 

• Pin-to-pin compatible with earlier generation BCM532x2: 

- BCM53282 pin-to-pin compatible with BCM53202 

- BCM53283 pin-to-pin compatible with BCM53212 

- BCM53284 pin-to-pin compatible with BCM53242 

- BCM53286 pin-to-pin compatible with BCM53262

• Optimized for managed-switch design 

• Fully compliant with DSL Forum TR-101 (Migration to Ethernet-based DSL Aggregation) 

• Flexible TCAM-based Compact Field Processor with four slices for packet classification and filtering 

• VLAN Features 

- Packet Remarking, S-VID, C-VID flexible mapping 

- Flexible QinQ support (add/drop one or two VLAN tags) 

- Ingress VLAN Mapping and Egress VLAN Mapping 

- S-Tag and C-Tag PCP/DEI, DSCP remarking 

- Programmable global ISP_TPID 

- IEEE 802.1™Q-based VLAN with 4K entries 

- Port-based VLAN 

- MAC-based VLAN 

- Protocol-based VLAN 

- VLAN-based direct forwarding

FEATURES (CONT.)

• MAC Address Learning 

- 16K MAC addresses: automatic learning and aging 

- 4K-entry multicast address table 

- Enable/disable MAC learning based on per-port, per-VLAN, or per-packet flow (Compact Field Processor) 

• Virtual Multicast Packet Replication 

• Port mirroring (Ingress/Egress), IGMP/MLD snooping 

• Spanning Tree support (IEEE 802.1d/1s/1w) 

• Link Aggregation support with automatic link failover 

• Supports IEEE 802.1x Extensible Authentication Protocol Over LAN (EAPOL) higher layer protocol 

• Denial of Service (DoS) attack prevention 

• Supports IEEE 802.3ah OAM remote loopback and trap OAM protocol packets to IMP port 

• Hardware supports remote monitoring (RMON) 

• Jumbo frame support of up to 2048 bytes 

• Programmable Broadcast, Multicast, and Unknown Unicast storm control 

• Programmable per-port and per-queue Bandwidth/Rate control, enable or disable IPG and Preamble Start Frame Delimiter (SFD) included 

• Min Bandwidth guarantee and Max Bandwidth limit scheduler 

• IEEE 802.1p-, Port/Virtual Port-, Protocol-, VID-, and DiffServ-based (IPv4/IPv6) QoS packet classification with eight priority queues per port 

• MDC/MDIO and SPI interfaces; SPI speed of up to 25 MHz 

• Internal oscillator simplifies design and reduces cost. 

• JTAG 

• Only two power rails required: 2.5V and 1.2V. 3.3V is optional. 

• Typical power consumption (all ports running at full speed with full traffic at normal voltage at room temperature): 

- BCM53282: 1.5W 

- BCM53283: 2.6W 

- BCM53284/BCM53286: 3.6W 

- BCM53288: 4.0W

OVERVIEW

image.png

Request a quote BCM53282MKPBG at censtry.com. All items are new and original with 365 days warranty! The excellent quality and guaranteed services of BCM53282MKPBG in stock for sale, check stock quantity and pricing, view product specifications, and order contact us:sales@censtry.com.
The price and lead time for BCM53282MKPBG depending on the quantity required, please send your request to us, our sales team will provide you price and delivery within 24 hours, we sincerely look forward to cooperating with you.

BCM53282MKPBG Prodotti associati